UPS-Lite Power Board With 1000mAh Polymer Lithium Battery For Raspberry Pi Zero

Description

Product Overview
UPS-Lite Power Board With 1000mAh Polymer Lithium Battery For Raspberry Pi Zero
Product introduction:
UPS-Lite is a UPS power supply specially designed for Raspberry Pi Zero (hereinafter referred to as pi).
It is powered by a 1000mAh polymer lithium battery, supports external power insertion detection, and supports charging and discharging. When the external power source is plugged in, the pi is powered by the external power source. When the external power source is unplugged, the pi seamlessly switches to the lithium battery. The UPS-Lite is connected to the pi main board through 5 elastic thimble pins (the pi main board must be soldered with a 40-pin header), and the pi power supply and power reading function are completed through the thimble. In addition, UPS-Lite also integrates the professional fuel gauge chip MAX17040G, two-color charging status indicator
Parameter:
Charging current: max 400mA at 5V
Output current: max 1.3A at 5V (when the external power supply is not plugged in, only battery power is used)
max 2A at 5V (when the external power supply is plugged in)
Power measurement: battery power SOC percentage, error ±2%, voltage measurement error within ±3mV
Function use:
Charging and power plug detection function
It is recommended to use a power adapter with a power of 5V2A and above to charge the UPS-Lite. Because when the lithium battery is low, the external power adapter not only needs to supply power to the pi, but also needs to provide part of the current to charge the lithium battery. During charging, the charging status indicator is red, indicating that the battery is charging. When the lithium battery is fully charged, the charging status indicator will turn green, indicating that the battery is fully charged. In addition, UPS-Lite has an external power adapter plug-in detection function, which can judge whether the external power supply is plugged in by the high and low level of the GPIO port. When the power supply is plugged in, the io4 (BCM number) of the pi will detect a high level. Low level, to enable the detection function, you must short the two pads on the back of the UPS, and set the GPIO to the floating input state. If the pads are not shorted, the GPIO detection state is unstable
Package Included:
1x Power board
1x 1000mAh Battery
Shipping Policy
Item Location
Payment Mathord
Returns Policy
About Feedback
Shipping Policy
1. We Ship to Worldwide
2. We ship your orders within 1-2 business days after the payment cleared.
3. Item shipped from China via china Post Airmail, reach most of the countries within 2 to 4 weeks.
4. Delivery time depends on destination and other factors, it may takes up to 20 days. If you don't receive
the item after 25 days,please keep in touch with us, we'll investigate and solve the delivery problem.
5. Import duties, taxes, and charges are not included in the item price or shipping cost. These charges
are the buyer's responsibility. Please check with your country's customs office to determine what these
additional costs will be prior to bidding or buying.
Item Location
ShenZhen
Payment Mathord
1. We accept PAYPAL only.
2. Payment must be made within 7 days of auction closing (Unpaid dispute will automatically open when item
is not paid in 7 days).
3. PLEASE NOTE: SHIPPING&HANDING DOES NOT INCLUDE DUTIES, LOCATL TAXES OR ANY OTHER IMPORTATION FEES.
4. Please list your special requests (color, packages, value of declaration, etc.) in the EBAY NOTES SECTION
when you make payment
Returns Policy
1. Customer satisfaction is our top goal. All products are quality checked. They are new and in good
condition when shipped to our customers. If product is defective or damage upon arrival, or wrong
product shipped, please keep in touch with us immediately. Returns accepted within 14 days of delivery date
and item must be in original new condition, not worn or altered in any way with attached tags & wrap.
Otherwise deal is final. Return shipping must be paid by buyer.
2. Please keep in touch with us first if you have anyproblems/questions/concerns. We will be happy to resolve
any issues you may have in a cordial and friendly manner.
3. We appreciate your Positive Feedback, and will do the same in return. PLEASE DO NOT leave
negative feedback without first communication with us. Please allow max 24 HOURS for us to respond
About Feedback
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is
very important to us. We request that you keep in touch with us immediately BEFORE you give us neutral or
negative feedback, so that we can satisfactorily address your concerns.It is impossible to address
issues if we do not know about them!