FMC Breakout, Breadboard, Prototype Card

Description

The FMC prototype board breaks out the complete LA bank of signals from the standard FMC Low Pin count Connector and the standard power rail and control signals. The user can add standard 0.1 inch spaced components and sockets for a wide variety of active and passive devices thus enabling the development of very complex capabilities. Standard control signals are available for the user to complete the interface to the chosen carrier card. The Serdes signals could be accesses from SMA connectors, which could be soldered on any side of the prototype card.
Fits both LPC and HPC FMC slots.
Specifications:
VITA 57.1 FMC compliant
Passive breakout of Low Pin count Connector (LPC) pins to 0.1? matrix grid for soldering or wire-wrapping
Development 18×16 hole matrix
Extended Ground rails and Power breakout for two power connections
User determined V
ADJ
and V
ref
JTAG breakout available in development matrix
4 SMA connectors for high speed serial signals (SerDes)
125MHz SerDes reference clock
Control signals available for user connections in development matrix
On board electrically erasable programmable memory, EEPROM, with 1Kb (128bytes) storage for configuration management and user data
Supports air and conduction cooling FMC
Single slot FMC
-40°C to 85°C operating environment temperature (industrial grade)
Deliverables:
FMC prototype board
Hardware user manual